Alternative Fuel

Alternative Fuel Products

Alt Fuels pg group

Parker Hannifin is a world leader in the design and manufacture of high-quality components used for CNG (compressed natural gas) and LNG (liquid natural gas) applications on vehicles, fueling and dispensing equipment. Parker offers the most complete selection of connector products including: NGV1 profile nozzles and receptacles for efficient fueling, and hose for dispensing; fittings and valves for plumbing vehicles; and ultrafine filters for assuring fuel purity. Nozzles and receptacles have been tested and conform with ANSI NGV1-94 Standard.

LNG Products

Liquid Natural Gas - Kodiak Series 1" Coupling

The Parker Kodiak^TM Series Liquified Natural Gas (LNG) Coupling is designed for fueling
vehicles operating on Liquified Natural Gas.

Parker's new Kodiak^TM Series Liquefied Natural Gas (LNG) Coupling is designed to make LNG vehicle fueling easy and trouble free. The Kodiak^TM offers easy single action connection with integral shut-off valves and hose swivel. Its innovate design provides a thermal break to reduce freezing of the locking mechanism. The rugged Kodiak^TM LNG nozzle and receptacle wear surfaces are manufactured from hardened stainless steel for maximum resistance to wear and damage. The dual interface seal technology provides improved seal life and is field serviceable.

	Single connect/disconnect action for quick and easy fueling.
	Valves automatically open when connected and close when disconnected.
	Nozzles and receptacles are supplied with dust caps/plugs.
	Hardened stainless steel wear surfaces.
	Dual interface seal technology for long service life.
	Thermal break between locking mechanism and cryogenic liquid.
	Integral swivel in the nozzle eliminates the need for additional hose swivels.
	Disconnect detent system allows for a controlled "zero pressure" disconnect.
	Field serviceable interface seals and valve seals.
	Versatile design may be used with other cryogenic fluids.
	Universal receptacle design will accept other manufactures nozzles.

Materials of Construction
Receptacle	Stainless Steel, Brass
Receptacle Seal	UHMWP
Nozzle	Stainless Steel, Aluminum, Brass
Nozzle Seal	PTFE, PCTFE, UHMWP
Specifications
Port Size Receptacle	1" or 3/4" NPTF
Port Size Nozzle	1" NPTF or 1" 37� Flared Fitting
Temperature Range	-320� F to + 160� F -195� C to + 71� C
Pressure Rating	500 psi - working
Spillage at Disconnect	<1 cc (<15ml)
Rated Flow	50 gpm
Weight - Receptacle	4.8 lbs. (22.kg)
Weight - Nozzle	10.0 lbs. (4.5 kg)

Liquid Natural Gas - 1" Coupling

The Parker LNG coupling is designed for fueling vehicles operating on Liquified Natural Gas.

This LNG Coupling is a low-spill, rugged product. It is simple to operate and maintain and permits fueling within acceptable time limits without the complexity of the 50 gpm rated 1" LNG coupling.

Simple push and turn connection.

Coupling Interface is not pressurized during connect or disconnect.

Interlock design prevents:

	Valve from being opened while nozzle is not connected.
	Nozzle cannot be disconnected while dispensing valve is open.

Minimal spillage at disconnection.

Swivel at inlet port to facilitate alignment.

Nitrogen purge capability at nozzle interface.

Automatic valve and Breakaway device prevents fuel spillage if an accidental disconnect occurs.

Rugged, damage-resistant design.

Materials of Construction
Housing, Handles	Aluminum Alloy
Receptacle Flange	Stainless Steel
Collar Internals	Stainless Steel
Seals & Bearings	PTFE and UHMWPE
Specifications
Body Size	1"
Port Size	1" NPTF or 1" 37� Flared Tube Fitting
Temperature Range	-40� F to + 150� F -40� C to + 66� C
Pressure Rating	500 psi - working
Air Inclusion	4.5 cc max/connect
Liquid Spillage	2.4 cc max/disconnect
Rated Flow	50 gpm

CNG Products

Type 1 System - CNG

Self-Serve CNG Fueling Nozzle For Public Stations.

	Compatible with the NGV1 receptacle profile.
	Push-To-Connect, one hand operation.Interlock design (Patented).
	Minimizes operator error.
	Prevents free flow of fuel without connection.
	Prevents disconnection while dispensing fuel.
	Automatic shut-off and venting before disconnection.
	Non-marring sleeves and handles on nozzles prevents paint chipping.
	Optional color coded valve handles for various service pressures.
	Optional vent recovery hose routes gas expended at nozzle interface away from the user.
	Gas can also be reclaimed at compressor suction.
	Durable ball locking device for longer life.

Materials of Construction
Nozzle Body	Stainless Steel
Valving	Stainless Steel
Sleeve	Brass with Polyurethane
Seals	Special Nitrile Compound
Valve Handle	Polyurethane
Grip	Ozone Resistant Foam

Type 2 Nozzle With 3 Way Valve - CNG

Fast Fill, Push-To-Connect Fueling Nozzle For Public Or Private Use.

Parker's "FM" Series product line was designed specifically for transferring compressed natural gas from compressors and dispensers to vehicles utilizing CNG. The "FM" Series nozzle will interchange (allow connection) to any receptacle conforming to the NGV1 profile. This Parker "FM" Series nozzle is used in conjunction with a 3-way valve in systems requiring the fill/vent function to be accomplished at the nozzle.

	Compatible with the NGV1 profile.
	Push-To-Connect, pull on polyurethane sleeve to disconnect.
	Non-marring polyurethane sleeve on nozzles prevents paint chipping of vehicles.
	Color coded valve sleeves for various service pressures. Blue = 3000 psi, Yellow = 3600 psi. Black also available. Reverse colors optional.
	Durable ball locking design for longer life.
	This Type 2 nozzle can be used for either fast-fill or time-fill service.

Materials of Construction
Nozzle Body	Stainless Steel
Valving	Stainless Steel
Sleeve	Brass with Polyurethane
Seals	Special Nitrile Compound

Type 2/Type 3 Nozzle - CNG

Fast Fill, Sleeve-Operated Fueling Nozzle For Public Or Private Use.

Parker's "FM" Series product line was designed specifically for transferring compressed natural gas from compressors and dispensers to vehicles utilizing CNG. The "FM" Series nozzle will interchange (allow connection) to any receptacle conforming to the NGV1 standard. The Parker "FM" Series Type 3 nozzle can be used stand-alone in self-depressurizing fueling systems (home fueling). This nozzle is also ideal for use in conjunction with 3-way valves where the fill/vent function must be accomplished at the nozzle (Type 2).

	Compatible with the NGV1 profile.
	Polypropylene sleeve prevents vehicle paint from being chipped while fueling.
	Durable ball locking design for longer life.
	This nozzle can be classified as Type 2 or Type 3 and subsequently can be used for both fast-fill or time-fill service.
	Durable ball locking design for longer life.
	This Type 2 nozzle can be used for either fast-fill or time-fill service.

Materials of Construction
Nozzle Body	Brass
Valving	Stainless Steel (AISI 316)
Sleeve	Brass with Polyurethane
Seals	Special Nitrile Compound

NGV1 Profile Recepticles

NGV1 Profile Receptacles Parker FM Series receptacles are designed for rigid-mounting on a compressed natural gas vehicle. Receptacles can be employed in both fast-fill and time-fill dispensing applications. The NGV1 profile utilized by FM Series receptacles, allows vehicle fueling to be accomplished with all CNG nozzles, conforming to the new NGV1/A.N.S.I. Standard.

	FM Series receptacles can be used with all versions of Parker FM Series nozzles.
	FM Series receptacles meet all dimensional and performance requirements of the new NGV1 Standard.
	Receptacles employ a differential pressure-actuated valve (non-contact).
	Internal check valve provides unidirectional flow - natural gas will only flow from dispenser to vehicle (not vice-versa).
	Brass or Stainless Steel body construction available.
	Rubber dust cap is available and highly recommended.
	Extensive end configurations and mounting methods available as standard.
	Internal components are 316 Stainless Steel.
	Seal is comprised of a special Nitrile compound formulated for compressed natural gas service.

Materials of Construction
Body	Brass or 303 Stainless Steel
Adapter	316 Stainless Steel
Valving	316 Stainless Steel
Seal	Special CNG Nitrile
Dust Cap	Low Temperature Nitrile Compound
Specifications
Working Pressure	3600 psi (248 bar)
Temperature Range	-40� F to +275� F -40� C to +135� F
Rated Flow	1500 scfm
Smallest Internal Oriffice	.075 in2 (.48 cm2)
Weight (recepticle only)	.20 lbs (.09 kg)

CNG 620

Coupling Quick Coupling for Compressed Natural Gas Service.

Parker's CNG-620 Quick Disconnect Coupling is ideal for converters, dispensers, utilities, and maintenance fleets. This Parker CNG fueling coupling is designed for use in Natural Gas Vehicle retro-fitting and fueling.

	Connects under pressure up to 3600 psi (receptacles pressurized).
	Actuation bar (Patented) eliminates need to bleed pressure before connecting.
	Grip-Ring style sleeve provides easy gripping action for gloved or wet hands.
	Interface seal designed (special Nitrile compound with PTFE washer) to withstand high pressures (3600 psi maximum working pressure).
	Integral Check Valve remains open during pressure differential created upon fueling.
	Industrial Interchange Profile (ISO 7241 Series B).
	Reduces the vented volume of gas with unique unidirectional flow design (will not permit backflow).
	Receptacle provides secondary check valve when used with an in-line vehicle check valve.

Materials of Construction
Body	Brass
Internals	Stainless Steel
Valve Seals	Special Nitrile Compound
Specifications
Size	1/4" body size with corresponding 1/4" female pipe or SAE thread ends
Pressure	3600 psi (248 bar) maximum Working
Temperature	-40� F to +275� F -40� C to +135� F

CNG Accessories

CNG 643 Breakaway Coupling

Parker CNG Break-Away Couplings are designed specifically for Break-Away harness located on CNG dispensers.

	Meets ISO 7241-1 (series B) dimensions; Industrial Interchange Profile.
	Corrosion resistant stainless steel componentry.
	Unique valving designed for compressed natural gas applications.
	Used with break-away leverage towers.

Materials of Construction
Body	303 Stainless Steel
Valving	303 Stainless Steel
Interface Seal	Special Nitrile Compound with PTFE backup ring
Specifications
Size	1/4" and 3/8" body sizes with ORB ends
Working Pressure	3600 psi (248 bar)
Temperature Range	-40� F to +275� F -40� C to +135� C

Seal-Lok� Fittings

O-Ring Face Seal Tube Fittings

Stainless steel Seal-Lok tube fittings, with appropriate elastomeric seals, are ideal for reliable and leak-free gas applications such as compressed natural gas systems. Seal-Lok is an O-ring face seal type fitting that consists of a nut, a sleeve, an O-ring and the fitting body. The flat sealing surface on the tube end is created by either flanging or brazing on the appropriate sleeve. When the fitting is assembled, this flat face compresses the O-ring into the precision groove to form a leak tight seal.

	Can be assembled to a specified torque.
	Minimal turn of the nut for tightening.
	Unlimited remakeability (with replaceable o-ring seal).
	Dimensions conform to SAE J1453 and ISO 8434-3.
	No tube entry - allows for drop-in assembly and easy disassembly.
	Readily adapts to inch and metric tube or hose connections.
	Pressure ratings in excess of 3,600 psi.
	316 SS material for corrosion resistance.
	Wide variety of available configurations.
	Tested per AGA1 (Test Report No. 125-AGA1-85).

CPI & A-LOK� Tube Fittings

Ideal for uses requiring instrument integrity connections in Natural Gas Systems. Parker CPI and A-Lok precision tube fittings are suitable for compressed natural gas as well as liquified natural gas applications.

Parker CPI fittings consist of three components: A body, a ferrule, and a nut. Parker A-LOK fittings consist of four components: A body, a front and rear ferrule, and a nut. Parker straight fittings are machined from cold drawn barstock. The cold drawing process ensures consistent dimensional tolerances, improved strength and better surface finish. Shapes are machined from close-grained forgings.

The Parker CPI single ferrule design allows the ferrule to bow during make-up. The bowing action creates an active element that can expand and contract with temperature cycling and maintain a leak-tight seal. The Parker A-LOK double ferrule design provides the same sealing integrity as CPI where double ferrules are specified.

	Option for single ferrule (CPI) or double ferrule (A-LOK�) design.
	Positive leak free seal even after repeated assembly.
	Broad applications with a variety of sizes.
	Available in 316 stainless steel, brass, steel and many high performance alloy metals to meet your needs.
	Both CPI & A-LOK meet the requirements of the
	Texas Railroad Commission.
	Tested per AGA 1ENGR. Report #106-AGAI-85

Check Valves

For Positive Unidirectional Flow Control Of Compressed Natural Gas (CNG) to 6000 psig.

	Special molded Buna-N seat designed for Compressed Natural Gas service
	Back stopped poppet
	100% factory tested
	Cracking pressures include 1, 5, and 10 psi.
	Port connections include male and female SAE Straight Thread and Seal-Lok.

Specifications
Body Material	316 Stainless Steel with Nitrile Seat
Pressure Rating	6000 psi
Temperature Rating	-40� F to +275� F -40� C to +135� C
Orifice	.187"
Cv Factor	75

CNG Hose (fill and vent)

CNG - Compressed Natural Gas 3600 to 5000 psi working pressure.
Conforms to NFPA 52 and proposed AGA/CGA, ANSI Standard 4.4.

Fueling hose specially designed for conveying compressed natural gas. High-strength conductive polymer core tube formulated to dissipate static electrical buildup. (Note: One end of hose assembly must be grounded; refer to CNG hose assembly instructions and pump manufacturers instructions). Thick urethane cover for abrasion and wear resistance. Note: All hose assemblies must be proof tested and electrically tested per NFPA 52. Each CNG kit includes a warning tag and thermoplastic hose guards. Wire spring guards required for AGA certification in CNG dispenser applications.(Refer to CNG hose assembly instructions Bulletin # 4660-CNG-PFD-2).

Electrically conductive polymer core tube, two or more layers of fiber reinforcement, and abrasion - resistant urethane cover. Standard cover is red and perforated for use with fuel, optional green for SCNG.

Twin-line or multi-line constructions: A wide range of fitting configurations are available in both 316 Stainless and Carbon Steel:

	Seal-Lok� O-Ring face seal.
	Male Pipe NPTF
	JIC 37� Flare
	Universal Tube Stub

Specifications
Temperature Range	-40� F to +150� F -40� C to +66� C
Fittings	55 series, 3CNG-4 and 5CNG-3 58 series, 3CNG-6, 4CNG-6, 5CNG-4, 5CNG-6, 5CNG-8 58H series, 5CNG-12, 5CNG-16

Not for use in airless paint spray applications See Parflex Catalog #4660 for size and dimensional data of Hose fittings available.

2-Way Ball Valve

For Positive Shut-off Of Compressed Natural Gas (CNG) to 6000 psig.

	Free floating ball design provides wear compensation.
	Approved and certified by the Canadian Gas Association (CGA)* and American Gas Association (AGA)*
	Available materials include 316 stainless steel, and brass.
	Bi-directional flow.
	90 degree actuation.
	Straight through flow path for minimal pressure drop.
	Micro- finished ball provides a positive seal.
	Panel mountable.
	Low Operating torques.
	Handle indicates flow direction.
	Available with CPI, A-LOK, male NPT, and female NPT.
	Positive handle stops.
	Valves are supplied with Kel-F� or PEEK seats.
	Color coded handles.

Specifications
Body Material	316 Stainless Steel with PEEK ball seats or 316 Stainless Steel with PCTFE ball seats
Pressure Rating	6000 psig
Temperature Rating	-40� F to +250� F
Cv Rating	.80 to 6.0

3-Way Ball Valve

3-Way Ball Valve For Filling and Venting of Compressed Natural Gas (CNG)

	Used in conjunction with Type 2 and Type 3 fueling nozzles.
	Free floating ball design provides seat wear compensation and increased seat life.
	180 degree actuation for directional flow switching.
	Spring loaded PEEK seat allows side porting of valve up to 3600 psig.
	Micro-finished ball provides a positive seal.
	Panel mounting available.
	Low operating torques.
	Positive handle stops.
	Color coded handles.

Specifications
Body Material	316 Stainless Steel with spring loaded PEEK ball seats
Pressure Rating (Bottom Port)	6000 psig
Pressure Rating (Either Side Port)	3600 psig
Temperature Rating	-40� F to +250� F
Cv Rating	.60

Home - Your Privacy - How to Order - Trade Partners - Feedback
SEARCH