Saws

Parker's Tru-Kut® saw vise is designed for providing an accurate guide for cutting tube square within ±1° with a hacksaw. For higher production, Parker also offers the power 910461 power cut-off saw, which is designed to operate at low speed to prevent work hardening the tube end. The saw will cut 1/4" through 2" copper, brass, aluminum, steel and stainless steel tube. An adequate supply of cutting fluid is provided by an internal recalculating pump. The unit is designed for bench mounting and operates on 110v power supply.

Deburr Tools

A quick twist of the wrist will deburr either the O.D. or the I.D. of the tube end. Parker’s In-Ex® deburring tools can be used on annealed steel, stainless steel, copper and aluminum, for tube sizes 1/8" to 1 5/8" O.D.   Parker also offers the 972125 Power Deburr Machine for medium production applications. This machine operates on a 110V power supply and is for use on annealed steel, stainless steel, copper and aluminum. For tube sizes 1/4" through 2" O.D.

Wrenches

Easy access ratchet wrench speeds fitting installation in tight locations. Rugged, snap-action jaws can be opened over tube lines, locked onto fitting hex and ratcheted within 1/8 turn. Full six point contact prevents fitting distortion common with wrench slippage. Ideal for tube line installations where compact runs require a multiple fitting make-up, disassembly and remakes. 360°s snap-action ratchet wrench for hex sizes from 3/8" to 2 1/4" across the flats and metric from 10mm to 22mm.  Inch sizes meet government specifications and are listed as NSN-5120-00-474-7227.

Tube Benders

Parker hand benders include built-in features to help you make accurate bends without kinks or wrinkles and with minimum flattening in tubing, from size 2 (1/8" O.D.) to 16 (1" O.D.). Parker’s larger benders include manual and hydraulic models, to meet any operating need for production or maintenance in the shop or in the field. Accessories are available to handle bends in a variety of tubing material from size 4 (1/4" O.D.) to size 32 (2" O.D.).

Flanging Equipment

The Parflange® machines have been designed to flange and flare tubing, specifically for use with Parker Seal-Lok (O-ring face seal) and Triple-Lok (37° flare) fittings. See Bulletin 4390-1040 or 4390-1025 for more details.

Brazing Equipment

Parker Seal-Lok fittings can be easily brazed by using Parker’s Multi-Flame Torches.

 Tube Flaring Tools

Parker makes the right type and size of flaring tool to meet the requirements of your job, from pocket-size hand flaring tools to electric and hydraulically powered models. Each one is designed to help you produce correct concentric flares, of the correct flare diameter, for dependable joints that are free from pull out under high pressures.

Pre-setting Tools

Parker Ferulok, EO and EO-2 fittings can be assembled more readily by using either the Ferulset® or VOMO hand pre-setter, the hydraulic powered Hyferset and Hydra-Tool or the electric powered EOMAT III®. All five assembly tools ensure strong, reliable ferrule pre-sets on the tubing.

Tube Preparation Centers

Parker offers two types of Tube Preparation Centers: the TP432 and the TP1025. Both are designed for preparation required of tube ends to be completed in one location. The TP432 performs four separate operations: cutting, deburring, flaring for Triple-Lok fittings and ferrule pre-setting for Ferulok, EO and EO-2 fittings. Four operations can also be performed by the TP1025: cutting, deburring, flanging for Seal-Lok fittings and flaring for Triple-Lok fittings.

Port Tapping & Counterboring Tools

Taps are available for SAE J1926-1 and ISO 6149-1 female straight thread ports in sizes 2 through 32 (M8 through M48). Taps are bottoming type and made from high speed tool steel. Parker also offers counterboring tools for SAE J1926-1 and ISO 6149-1 (small and large spotface) female straight thread ports in sizes 2 through 32 and M8 to M48.

Thread Identification Tools

Parker offers a Thread Identification Kit to be used to identify metric, BSP, SAE and NPT threads. It contains thread gauges, calipers, thread profiles, and an instruction booklet. Also offered are Portboards that can be used for identification of ISO, SAE, BSP and NPT ports and port threads. They are machined with female threads for quick and easy identification by screwing in the male port end.

O-Ring Installation Tools

Parker’s O-ring Installation Kit contains a complete set of tools for installing Parker O-rings ranging in size from size 3-902 through 3-932. Easy-to-follow instructions permit the proper fit the first time.Each tool is sized to allow easy installation, while preventing damage to the O-ring as it is passing over the threads. Good for determining the size of O-rings as well. Also offered are Parker's Captive O-Ring assembly tools for assembling o-rings in Seal-Lok fittings. These tools are offered in both hand held and bench mountable versions.

Lubricants & Sealants

Lubricants act as friction reducers to ease assembly and prevent galling, corrosion and seizing of components. Permatex Anti-Seize lubricants are recommended for use with assembly of stainless steel threaded components where galling may be a problem. Thread sealants seal and secure metal pipes and fittings by filling the space between the threaded metal parts. Thread sealants harden to prevent leakage caused by vibration loosening, tape shredding, solvent evaporation, damaged threads and temperature cycling.

Cleaners